Pages

▼

Thursday, November 11, 2021

MI Audio Blues Boy Deluxe

 Stumbled across the schematic for this one over on FSB and it seemed interesting enough. Should be able to squeeze it into a 1590B. 








at

17 comments:

  1. DerPrNovember 11, 2021 at 10:03 AM

    Hi! cant see pots marks on the boards :)

    ReplyDelete
    Replies
    1. AnjangNovember 12, 2021 at 5:02 AM

      Yup... Me too

      Delete
    2. jpupoNovember 13, 2021 at 11:39 AM

      i would say the pot marks are listed below in the respective position;) (bearing in mind that pin1 is square)

      Delete
    3. Effects LayoutsDecember 1, 2021 at 9:57 AM

      Sorry for the confusion guys. I updated the image with the pot names and numbering.

      Delete
  2. skizoideNovember 11, 2021 at 11:27 AM

    The square pads in the etch layout are pin 1.

    ReplyDelete
  3. ZZOYDNovember 12, 2021 at 11:26 AM

    Hi, David. Remember this beautiful over? https://www.pedalpcb.com/docs/SeyfoamOD.pdf?fbclid=IwAR1anjIaQAAuFw3IyAIBIoMQ41TENH181lu_t82z7co-U3MekhvSKkvmXaM

    ReplyDelete
  4. ZZOYDNovember 12, 2021 at 11:26 AM

    Seymour OD 805

    ReplyDelete
  5. UnknownNovember 13, 2021 at 12:37 AM

    It seems to me that the 22nF capacitor at the output should be 2.2nF

    ReplyDelete
    Replies
    1. MXFXNovember 13, 2021 at 4:47 AM

      This comment has been removed by the author.

      Delete
    2. MXFXNovember 13, 2021 at 4:48 AM

      This comment has been removed by the author.

      Delete
  6. UnknownNovember 13, 2021 at 8:02 AM

    https://www.freestompboxes.org/viewtopic.php?t=31576&hilit=Audio+boy

    ReplyDelete
  7. ELETRONIC TOPNovember 18, 2021 at 7:46 PM

    where are they on the plate (tone, bright, gain, vol, character, mid) ? tankyou

    ReplyDelete
  8. QuetzalcoatljlhcNovember 30, 2021 at 1:13 PM

    Greetings. I see that next to the 9v power supply there is a pin that I don't know where it is connected.

    ReplyDelete
  9. QuetzalcoatljlhcDecember 2, 2021 at 11:21 PM

    Today I finished it. sounds great. It is verified.Thanks for your pcb.

    ReplyDelete
  10. David BrownFebruary 10, 2022 at 2:37 PM

    This comment has been removed by the author.

    ReplyDelete
  11. David BrownFebruary 10, 2022 at 3:01 PM

    Vi algo errado no Layout... O pino 1 & 2 do Pot de Médio está indo para o VREF, sendo que, no Schematic, o pino 1 do Pot de Médio vai para o resistor de 2K2 e o mesmo vai para VREF... Enquanto o os pinos 2 & 3 vão para o pino 3 do Pot de Tone...

    ReplyDelete
  12. USBOctober 4, 2022 at 3:39 PM

    Works!!! But the mid pot and the bright pot ( lugs 1 & 3) are inverted !!

    ReplyDelete