Here's an optical compressor I came across on FSB and hadn't seen a layout of it before. There's some question as to whether the schematic is accurate on FSB, so build with care. The original uses a rectifier array component, but I've broken that down into 4 discrete diodes (1N4148, 1N4001, etc.) since I figure more people will have those on hand than the rectifier component. Should fit nicely in a 1590B. Schematic and more info on FSB.
Hello friend, you are not the only Brazilian to visit the page, so even to speed up the response process, speak in English, not Portuguese! The diodes are 1n4148!
is the order of the diodes correct? mine's working, but I can't hear it 'compressing' and it has a slight overdrive when the gain is about 75%. Does the LED on your build light up? TIA!
ReplyDeleteAny replacement for the lf353p?
I'd imagine most dual opamps should sub in just fine.
Deletecan i use 4558 ?
DeleteBoa tarde. Quais são os diodos?
ReplyDeleteGrato.
Hello friend, you are not the only Brazilian to visit the page, so even to speed up the response process, speak in English, not Portuguese! The diodes are 1n4148!
Deletewhich one LDR & LED type i can use for this PCB?
ReplyDeleteLF353P CAN it be replacet with lf353n?
ReplyDeleteProbably. Usually the letters after the numbers are manufacturer specific.
DeleteCollected. Does not work. The LED does not light up. Something is wrong in the original scheme.
ReplyDeleteMe too, who is completed right ?
DeleteAnyone verified it?
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteI did it verified
ReplyDeleteBut i really dont know what compression is
And i dont know if attack knob is doing anything or not
I feel itslike a boost pedal. I just dont know how compression pedal sounds like haha
Does the LED light up on your build?
DeleteLed inside that ldrand led thing?
DeleteI cannot see it.. but compressor does work
Im not syre abou attack but otherworks
I made 2 pedals
ReplyDeleteU can mark it as verified
is the order of the diodes correct? mine's working, but I can't hear it 'compressing' and it has a slight overdrive when the gain is about 75%. Does the LED on your build light up? TIA!
DeleteIs there any update on this one? Can anybody get the LED lighting up?
ReplyDeleteNo, led no work
Delete