Another Marshall-in-a-box, the Ms. Foxy Brown uses 3 J201s and feels a lot like an older Run Off Groove design (though it's not). As per usual, you'll need to bias the J201s to about 4.5v and then fine tune as needed. Should fit easily in a 1590B. Schematic for reference.
Menatone seems to have a pretty vocal following out there and I've wanted to try out one of the circuits. I just don't think I need another Marshall-type box right now.
Maybe when I'm done with the pile of boards I have here now...
Heres an interesting Brian May in a Box that I think would be a good addition to your library. https://www.diystompboxes.com/smfforum/index.php?topic=73679.0
Its a NPN Rangemaster going into a Vox AC30 sim (I think - definitely the RangeBlaster available somewhere online). I've made it and its nice sounding. I also made another but with a Cornish TB-83. Oh - also I took a real Cornish TB-83 apart and took all the epoxy off so I have a schematic for that too if you are interested.
Peter Jung I built a Menatone KOTB pedal from one of the DIY vendors and it was not plexi like,as one reviewer on Youtube said it can be harsh!! the highs were brutal,J201 pedals can be hard to get sounding right,
Aha... thanks for the comment, Iago. I had assumed it was a "brown sound" kind of thing and had not looked up any details. The small notes given at the beginning of the video made it look like it was all Marshall oriented.
In the demo video.... anyone else here the high pitched whine from the pedal? {may be older but my ears are very young}
ReplyDeleteBuilt (perf) and verified.
ReplyDeleteThanks for the verification, Peter. Speedy, as usual!
ReplyDeleteHow would you personally rate this Marshall-in-a-box to any others that you've built?
It may just be my ears, but I thought this sounded pretty thin.
DeleteThanks for the input.
DeleteMenatone seems to have a pretty vocal following out there and I've wanted to try out one of the circuits. I just don't think I need another Marshall-type box right now.
Maybe when I'm done with the pile of boards I have here now...
Where are you guys getting "Marshall" from? The website says it's based on the American Volume/Tone amps with brown tolex.
Deletecan I replace the 1n4001 with a 1n4007?
ReplyDeleteYep!
Deletecould you do the pcb of this project? http://guitar-fx-layouts.42897.x6.nabble.com/file/n32877/stage_fright.png
ReplyDeleteI did not find an email from the web to send it to you privately. Sorry
O_O Good grief that's huge. Probably not. haha Does Bean not make that board anymore?
DeleteHeres an interesting Brian May in a Box that I think would be a good addition to your library.
ReplyDeletehttps://www.diystompboxes.com/smfforum/index.php?topic=73679.0
Its a NPN Rangemaster going into a Vox AC30 sim (I think - definitely the RangeBlaster available somewhere online). I've made it and its nice sounding. I also made another but with a Cornish TB-83. Oh - also I took a real Cornish TB-83 apart and took all the epoxy off so I have a schematic for that too if you are interested.
Would love to see the TB-83 schematic! If you don't mind emailing it to me (gehringcustomguitars (at) gmail.com) or send it via Facebook messenger.
DeleteEmail sent. Tell me if you don't get it
DeletePeter Jung I built a Menatone KOTB pedal from one of the DIY vendors and it was not plexi like,as one reviewer on Youtube said it can be harsh!! the highs were brutal,J201 pedals can be hard to get sounding right,
ReplyDeleteOla
ReplyDeleteThis is actually a Fender Brownface era "amp-in-a-box" pedal, not a Marshall-based one.
ReplyDeleteAha... thanks for the comment, Iago. I had assumed it was a "brown sound" kind of thing and had not looked up any details. The small notes given at the beginning of the video made it look like it was all Marshall oriented.
Delete