Pages

▼

Thursday, December 13, 2018

Caline Mark 4

Got a request for this and an interesting circuit. Apparently it's a simplified version of the MI Audio Tube Zone. Should be a good jumping off point for modding. Schematic on FSB.



at

14 comments:

  1. Ramon HerverDecember 13, 2018 at 10:15 AM

    Thanks and greetings from México!

    ReplyDelete
  2. naderDecember 15, 2018 at 3:23 PM

    I just built it, nice layout, nice sound. I loved it! Verified! Thank you very much for listening to my request.

    ReplyDelete
  3. leddreamzeppelinDecember 16, 2018 at 11:14 AM

    Hi!
    Can you make the layout for the subject of this topic?
    http://www.freestompboxes.org/viewtopic.php?f=7&t=29348

    ReplyDelete
  4. UnknownDecember 20, 2018 at 7:38 AM

    What a subs for 2.7nf...? Thanks...greetings from indonesia.

    ReplyDelete
  5. UnknownDecember 27, 2018 at 10:22 AM

    Verified! Replaced IC with TL072

    ReplyDelete
  6. vFxaudioJanuary 2, 2019 at 3:42 AM

    Can u givee me the ready to print file layout plz?

    ReplyDelete
  7. vFxaudioFebruary 19, 2019 at 4:44 AM

    can i replace 220nf with 100nf?

    ReplyDelete
  8. Paulo ShureJuly 27, 2019 at 8:11 PM

    this video: https://youtu.be/CjeSU-AcTd4

    ReplyDelete
  9. Paulo ShureSeptember 15, 2020 at 7:38 AM

    I put this pedal on a board with others and noticed that its volume is lower, can I change the pot of 100ka for a higher value to get more volume?

    ReplyDelete
    Replies
    1. KirkusDecember 19, 2020 at 3:09 PM

      Ditch the 100k resistor above the 6n8 cap where the level pot sits and u'll get the volume boost mate

      Delete
  10. E5October 8, 2020 at 9:16 PM

    Verified, using NE5532 and getting warmer sound. Nice layout.

    ReplyDelete
  11. 4rny3kv3toSeptember 5, 2021 at 6:21 AM

    https://www.youtube.com/watch?v=a7swIoSQuYI&t=290s

    ReplyDelete
  12. João LimaJanuary 5, 2022 at 2:39 PM

    Hoje, finalmente arranjei um tempinho pra montar este projeto. Fiz numa plaquinha dessas perfuradas e ilhada, usando os terminais dos próprios componentes para fazer as ligações. Levou aproximadamente 60 minutos e o brinquedo estava pronto. Pluguei num amplificador multi-uso, um famoso Wattsom, na minha 2x12 Alien Ace. Estou surpreso com o som! Um pouco brilhante com singles, mas com humbuckers ficou lindo! Em breve vou testalo no head all tube e ver como se comportará. A princípio, estou felizão!

    Saudações do Brasil.

    ReplyDelete