Pages

▼

Friday, August 3, 2018

Feisty Little One Thermal Detonator

It's Fuzz Friday! This one got traced on FSB a while ago and I finally got around to drawing it up. It's a silicon Fuzz Face with bias control, sag control, and switchable feedback loop (oscillation). I laid it out like a zVex pedal (at least in control layout) and it should fit in a 1590B, either with the circuit board flat or standing vertically in the enclosure.



And here's a wiring diagram to make the offboard wiring a little clearer.

at

4 comments:

  1. Balma GAugust 15, 2018 at 10:10 AM

    Verified. It has an excellent sound. I only made a few changes, I used a linear pot in the volume, because with the logarithmic it worked only 90% onwards. And the oscilate pot I left it fixed as trimpot, since I found an acceptable sound in a single point.

    ReplyDelete
  2. AnonymousSeptember 23, 2018 at 11:29 AM

    Bendiciones, te puedo pedir un favor, no sé si me puedes mandar todas las imágenes de efectos que tu muestras aquí por esté correo, solo si tienes tiempo, por supuesto. Muchas gracias :)

    ReplyDelete
  3. sholvanJuly 17, 2023 at 9:53 AM

    What application do you use to make this PCB?

    ReplyDelete