Pages

▼

Wednesday, June 6, 2018

EarthQuaker Devices Dunes

If the Palisades is too much for you, the Dunes has a much smaller footprint and less controls to get distracted with. Pretty standard Tube Screamer clone with clipping options and a couple tone shaping switches. Might be a bit of a squeeze but it will fit in a 1590B with board mounted pots.


at

26 comments:

  1. UnknownJune 6, 2018 at 1:43 PM

    Ohhh Yeaahhh!!!

    ReplyDelete
  2. skizoideJune 6, 2018 at 2:45 PM

    Yeaahhhhh!!!

    ReplyDelete
  3. UnknownJuly 22, 2018 at 11:53 AM

    you can tag it verified.

    to those who build it, be carefull with the voice switch, as there is an insane volume boost when in the middle.

    ReplyDelete
  4. AlejandroNovember 20, 2018 at 5:56 AM

    Some replacement for the Lm833?, One more question, pot A are linear?

    ReplyDelete
    Replies
    1. Effects LayoutsNovember 20, 2018 at 9:03 AM

      Any dual opamp will work here (TL072, JRC4558, etc). A pots are audio/log taper.

      Delete
    2. AlejandroNovember 23, 2018 at 5:04 PM

      Thanks, I'm from Bolivia and I can not get some components, I can not find the 2N7000 or some equivalent, any option?

      Delete
    3. jordaoAlvesJanuary 21, 2019 at 9:20 PM

      bs170 (180°)

      Delete
    4. ForeJune 3, 2019 at 12:00 PM

      Yo tambien tam de bolivia santacruz, los 2n7000 los venden en la electronica cyber http://www.electronica-cyber.com/index.php/component/virtuemart/electronica/transitor/transistor-2n7000-npn-to-92-detail.html?Itemid=0

      Delete
  5. rock561November 23, 2018 at 4:30 AM

    Я его построил! Отлично звучит!

    ReplyDelete
  6. Ramon HerverFebruary 11, 2019 at 8:24 PM

    Hi! 3 pots are in a row? Most of your layouts the center pot are off axis and it’s nice! Thanks for the layout. Maybe i connect the center pot off axis with some cable.

    ReplyDelete
  7. kenmaroldJune 24, 2019 at 11:51 PM

    I tried to reverse engineer this back into a schematic in Eagle so I could play with the physical layout, but I must have something wrong. Is there anyone willing to shed a little expertise on things for me. Any help would be greatly appreciated.

    https://www.dropbox.com/s/ftbocl7i97vijt4/Dunes.pdf?dl=0

    ReplyDelete
  8. HoomanNovember 25, 2019 at 7:51 AM

    Anyone have schematic for this pedals?

    ReplyDelete
  9. WormWoodOctober 20, 2020 at 10:13 AM

    Just wanted to say thanks for all of the great layouts. I just finished a build of this last night and it sounds killer!

    ReplyDelete
  10. rudolf-schmidlNovember 30, 2020 at 11:43 AM

    Hi,
    I can get 2N7000G. Is this the same as 2N7000, if not, is it possible to use?

    ReplyDelete
    Replies
    1. Effects LayoutsNovember 30, 2020 at 11:50 AM

      I think the G is just a manufacturers marking. Should be the same

      Delete
  11. rudolf-schmidlDecember 7, 2020 at 7:00 PM

    Hello,
    please can you tell me something about the lead spacing of the different film capacitors or how I can calculate it by the count of the pinholes?

    ReplyDelete
    Replies
    1. Effects LayoutsDecember 8, 2020 at 8:55 AM

      The grid everything is designed on is 0.1". Lead spacing is usually 0.2" or 0.3" for film caps in my layouts.

      Delete
  12. AlexJanuary 17, 2021 at 3:55 AM

    The clipping led on my build is not lighting up, I measure some voltage going through the led, but only 0,3V at max settings when not hitting the strings. Is this the same for you guys?

    ReplyDelete
    Replies
    1. AlexJanuary 17, 2021 at 3:56 AM

      The voltage goes up when I do hit the strings but not enough for it to light up

      Delete
    2. Effects LayoutsJanuary 18, 2021 at 9:58 AM

      It's not necessarily meant to light up, just clip the signal.

      Delete
  13. Zaraki1337October 28, 2021 at 12:25 AM

    This comment has been removed by the author.

    ReplyDelete
  14. Zaraki1337November 24, 2021 at 12:03 PM

    This comment has been removed by the author.

    ReplyDelete
  15. SamunesSeptember 8, 2023 at 7:50 AM

    Is the 1uf capacitor non-polarized?

    ReplyDelete