Pages

▼

Tuesday, November 14, 2017

Wampler Hot Wired V1

The Hot Wired is a dual channel dirt box offering distortion and overdrive modeled after the tones used by Nashville session artist Brent Mason. I've laid it out for board mounted pots with the board mounted vertically in the enclosure. I laid it out with a 1590BB in mind, but you might be able to make it work in a 125B as well.


at

24 comments:

  1. PeteNovember 14, 2017 at 3:37 PM

    Hell yeah!

    ReplyDelete
    Replies
    1. PeteNovember 14, 2017 at 3:50 PM

      Although, I think you need to change the description for the diodes... D1,D2,D4,D5 red LEDS, not D1-D3?

      Delete
    2. Effects LayoutsNovember 14, 2017 at 4:26 PM

      Yeah I made that confusing, eh? Fixed it.

      Delete
    3. LeonNovember 15, 2017 at 12:39 PM

      I think volumeB=100K

      Delete
    4. Effects LayoutsNovember 16, 2017 at 12:46 PM

      Fixed

      Delete
  2. AnjangNovember 16, 2017 at 1:57 AM

    secret schematic ??

    ReplyDelete
    Replies
    1. LeonNovember 16, 2017 at 4:08 AM

      http://www.freestompboxes.org/viewtopic.php?f=7&t=28674

      Delete
  3. UnknownNovember 18, 2017 at 2:12 PM

    i made it. work good

    ReplyDelete
  4. RomanFebruary 1, 2018 at 3:02 AM

    Change on the layout 820K (FATB2 and 1 μF connection) to 820R. In the rest everything is fine, great sound. Thank you for the wonderful work!

    ReplyDelete
  5. bluesanderlMarch 17, 2018 at 1:48 PM

    hi everybody!
    i buildt it and it worked perfect. but after if read about the blend function in V2, i added the split ń blend circuit to the overdrive section! and now......
    "fantastic"
    thanks very very much for this cool layout

    greetings from austria

    ReplyDelete
    Replies
    1. CristianDecember 10, 2018 at 12:54 PM

      Hello, that sounds great! How did you do that?

      Delete
  6. MauroAugust 22, 2018 at 8:33 AM

    Friends....How to inter-connect the 2 3PDT between them?

    ReplyDelete
    Replies
    1. MauroAugust 22, 2018 at 10:22 AM

      Another question... can I use different pots? the rev log are nearly impossible to find... can you recommend an online supplier that can provide them? Thanks again!

      Delete
    2. Effects LayoutsAugust 22, 2018 at 1:59 PM

      You can use a linear taper in place of the rev log, but it won't have quite the control as the original. I end up ordering a lot of parts from Tayda. They generally have a good price on pots and have lots of values and tapers.

      Delete
    3. Maksound PerúSeptember 15, 2020 at 7:41 PM

      This comment has been removed by the author.

      Delete
    4. Maksound PerúSeptember 15, 2020 at 7:44 PM

      Bueno aunque tarde (recien leo tu pregunta) aquí hay en la ultima parte del documento pdf que adjunto, como conectar ambos switch ( lo probe y funciono ok) aunque el pedal es fabuloso, canales individuales suenan ok, un poco de ruido, cuando se juntan ambos canales es un desastre, es así? (esta pregunta para el señor que nos ha otorgado este circuito)

      Delete
    5. Maksound PerúSeptember 15, 2020 at 7:45 PM

      https://www.madbeanpedals.com/downloads/MBP_FootswitchWiring.pdf

      Delete
    6. Maksound PerúSeptember 15, 2020 at 7:47 PM

      Two-3pdt Wiring (Page) https://www.madbeanpedals.com/downloads/MBP_FootswitchWiring.pdf

      Delete
  7. Maksound PerúSeptember 15, 2020 at 7:35 PM

    Loa pedales de Wampler son excelentes, he hecho este en mención, suenan muy bien los canales individualmente hay cierto ruido, pero cuando se juntan ambos canales hace un ruido espantoso, es así, aquí he usado los mejores componentes y tal cual los mencionados en tu circuito, pero hay este inconveniente, los que mas arriba lo han hecho no tienen este problema ??

    ReplyDelete
    Replies
    1. Maksound PerúSeptember 15, 2020 at 7:43 PM

      Porque si no.. no tiene sentido un pedal así y darse el trabajo de enclaustrarlo en una caja.

      Delete
  8. SERGJanuary 1, 2022 at 3:39 PM

    This comment has been removed by the author.

    ReplyDelete
  9. SERGJanuary 1, 2022 at 3:41 PM

    "hi everybody!
    i buildt it and it worked perfect. but after if read about the blend function in V2, i added the split ń blend circuit to the overdrive section! and now......
    "fantastic"
    thanks very very much for this cool layout"

    Hi! How did you do that? Please, help me!! I so need that...

    ReplyDelete
  10. Ariel StompBOXQJuly 24, 2023 at 10:08 AM

    Can I Use a TL072 or 4558?

    ReplyDelete