Pages

▼

Monday, June 5, 2017

Hell's Gain

Got a request for this one. It was designed by Haroldo Gamal and Leonardo Plautz Chocron. The Hell's Gain is a high gain distortion with an active 3-bad EQ. It's a big one that ended up with a lot of jumpers, but's fairly standard with circuit using a bi-polar supply. It'll fit in a 1590BB or you might be able to squeeze it into a 125B if you turn the board sideways. Enjoy!

at

14 comments:

  1. UnknownJune 5, 2017 at 5:01 PM

    who cares about the puentes??!?!?!?!
    graves=bass
    medios=mids
    agudos= trebel

    ReplyDelete
  2. UnknownJune 7, 2017 at 2:10 AM

    Hey dude, very good work! Can i do a request too? Can you do the layout of the Richie Kotzen OMG, please?
    http://www.tech21nyc.com/products/effects/images/omg_main_image.jpg
    Thank you very much!
    And the Ronaldo is right, if you want to label it in English:
    Graves = Bass; Agudos = Treble; Medios = Mid.
    Have a nice day!

    ReplyDelete
    Replies
    1. plushJune 7, 2017 at 8:19 AM

      Hi Sam,
      If you want him to make a layout for you, you need to provide a working schematic, at least.

      Delete
    2. UnknownJune 8, 2017 at 11:54 PM

      Hey man, i tried a lot to find it for days, but unfortunately i could not find it in any place. I am so sorry, i though maybe you have this schematic in your archives or something like this :(

      Delete
  3. UnknownJune 8, 2017 at 11:56 PM

    To be sincerely i am trying to find that schematic for more than a month... I asked because i really thought maybe you have it.

    ReplyDelete
    Replies
    1. Effects LayoutsJune 9, 2017 at 9:40 AM

      Sorry man, I don't have one and haven't had any luck finding it online either.

      Delete
    2. UnknownJune 10, 2017 at 1:18 AM

      Thank you anyway, man :) And thank you a lot for posting that amazing layouts for us.

      Delete
  4. Giovane SoaveJune 9, 2017 at 1:39 AM

    YAY another brazilian project!

    ReplyDelete
    Replies
    1. Balls DeepJune 29, 2021 at 4:47 PM

      I would say Brazilliant. I’m kidding. I would not say that. I’m pretty sure I would get my ass kicked for saying something like that. Which, I should get my ass kicked for saying something like that.

      Delete
  5. UnknownJune 16, 2017 at 10:07 PM

    Hi brother, I would like to know about a component that is in the layout in the format that is written 1uf, what component is this ??? ... does not have polarity! Thank you in advance, I'm missing this component so I can finish my assembly.

    ReplyDelete
    Replies
    1. Effects LayoutsJune 17, 2017 at 8:42 AM

      It's a box film non-polarized cap. I get them from Tayda.

      Delete
    2. Effects LayoutsJune 17, 2017 at 8:43 AM

      You can use a 1uF electrolytic cap tho. Positive side closest to the IC.

      Delete
  6. Taciano CanassaMay 22, 2019 at 11:04 PM

    This guys didn't mention but i'm pretty shure its your layout based on the position of key components as the Opamps. So i think it1s verified!
    https://www.youtube.com/watch?v=IBs2c3khpfA

    ReplyDelete