Pages

▼

Friday, March 3, 2017

FuzzHugger FX Doom Bloom

Fuzz Friday! Do you want a fuzz with a bunch of knobs, versatile tones, and works on guitar and bass? Good. Here's the Doom Bloom from FuzzHugger. Think of it as an Electra distortion pushing a Bazz Fuss with a handful on pots thrown in for a bunch of tweak-ability. It'll be a tight squeeze in a 1590B, but it should fit.


at

12 comments:

  1. Ian NMarch 4, 2017 at 8:39 PM

    Looks like there is a missing connection here. Collector of Q2 should connect to the junction between lug 2 of High, which should go to lug 2 and 1 of Body. Lug 3 of Body should only go to the 1uf cap.

    ReplyDelete
    Replies
    1. Effects LayoutsMarch 6, 2017 at 1:22 PM

      Thanks for catching that. I must have messed it up when I reorganized Q2. It's fixed now.

      Delete
  2. johnkMarch 31, 2017 at 3:29 PM

    i think that it's still not quite right. the collector of Q2 should connect to lug 2 of the high pot and lugs 1 & 2 of the body pot. yours shows it connected to the 1uf. i used your first layout (with errors) and then corrected it like this:

    http://johnkvintageguitars.homestead.com/Effects/Fuzz-ODs/Fuzzhugger/DoomBloom/01-Doom_Bloom_Layout.png

    i built it up and tested it and it works like the original pedal.

    ReplyDelete
    Replies
    1. UnknownMay 11, 2017 at 5:03 PM

      Hey do you have an etchable print out of your circuit?

      Delete
    2. ArielSeptember 21, 2017 at 9:40 PM

      Do you have the layout to print?

      Delete
  3. plushApril 7, 2017 at 6:54 AM

    Hi!

    I had to make certain changes to your layout (similar to ones suggested by John) to make it work.

    As usual, top jacks for the win: http://i.imgur.com/HCHbhd1.jpg

    My regards.

    ReplyDelete
  4. johnkApril 7, 2017 at 1:48 PM

    FWIW, here's a couple of pics of my build:

    http://johnkvintageguitars.homestead.com/Effects/Fuzz-ODs/Fuzzhugger/DoomBloom/DoomBloom-01.jpg

    http://johnkvintageguitars.homestead.com/Effects/Fuzz-ODs/Fuzzhugger/DoomBloom/DoomBloom-02.jpg

    ReplyDelete
  5. PGZJanuary 14, 2018 at 7:24 PM

    Has been this layout verified ? Thx

    ReplyDelete
  6. PeteMarch 5, 2018 at 8:34 AM

    This one is now verified

    ReplyDelete
  7. UnknownAugust 16, 2018 at 4:32 PM

    I verified and works ok, but i have a question, the lug 3 of high is no conected... is ok with it? because y go to full range with this pot and he goes to silence the pedal...
    Thanks and greetings from chile!

    ReplyDelete
    Replies
    1. Effects LayoutsAugust 17, 2018 at 11:15 AM

      The High pot is just a variable resistor. Lug 3 doesn't need to be connected. Thanks for verifying!

      Delete
  8. MisjahOctober 24, 2021 at 11:40 PM

    Just made this.... Sounds pretty cool

    https://youtu.be/SWcX4-cr_Ck
    https://youtu.be/htnknfJD6_c

    ReplyDelete