Pages

▼

Monday, October 31, 2016

CMAT Mods Signa

Got a request for this one. It's a barely modified Tube Screamer with a clipping switch to go between silicon and red LEDs. The switch is a SPDT on/off/on by the way. Gearmandude really seems to like it.



at

16 comments:

  1. BerkicauOctober 31, 2016 at 10:38 AM

    couldn't agree more with Gearmanndude, this is indeed the beAst OD around

    you're awesome as usual buddy

    ReplyDelete
  2. UnknownOctober 31, 2016 at 6:50 PM

    Tipe of 1uf caps????

    ReplyDelete
  3. pete_gNovember 2, 2016 at 12:27 AM

    Can you find a schematic and make a Kent 6400 distorter?
    It's got 4 resistors and 5, 15 & 25uf caps, even though it may seem similar to a Schaller fuzz it's different and am keen to hear it. Uses ac 151r transistors.

    ReplyDelete
  4. BerkicauNovember 2, 2016 at 9:13 AM

    VERIFIED!!
    I use 47pF instead of 51
    It makes sense now why Gearmanndude loves it XD. it sounds amazing

    thank you for this one buddy,
    you are awesome like usual!!

    ReplyDelete
  5. alexmanNovember 2, 2016 at 4:53 PM

    Thank you! My request was hear. Cmatmods excellent pedal and your layouts too.
    p.s. With the tone of figured out, everything works.

    ReplyDelete
  6. UnknownMarch 21, 2017 at 5:08 AM

    I do not find drilling template for this pedal Dude.

    ReplyDelete
  7. MartinMay 1, 2017 at 11:48 AM

    Hello everybody, is it really a 2k tone pot, instead of a 20k tone potentiometer? Thank you very much.

    ReplyDelete
  8. MartinMay 12, 2017 at 1:18 PM

    Thank´s

    ReplyDelete
  9. mamah chyntiaOctober 14, 2018 at 8:34 AM

    it awasome...thank man

    ReplyDelete
  10. UnknownJune 19, 2019 at 7:30 PM

    Do you have the scheme please

    ReplyDelete
  11. Thiago Pereira RodriguesAugust 10, 2020 at 8:42 PM

    O que vai no D2 e D1?

    ReplyDelete
  12. E5September 26, 2020 at 8:31 PM

    any schematic for this one?

    ReplyDelete