Pages

▼

Friday, May 6, 2016

D*A*M Ezekiel 25:17

Here's a non-Fuzz Face/Tone Bender offering from D*A*M for Fuzz Friday. It's designed for bass, but sound great on guitar as well. It uses one half of a dual op amp to blend in clean signal, and the other half creates the distortion via soft clipping. You have 4 options for clipping diodes, germanium, silicon, LEDs, and bypass, selectable via a rotary switch. The rotary will have to be wired off board, but the rest of the pots are board mounted.


at

25 comments:

  1. UnknownMay 6, 2016 at 10:07 AM

    You're my hero !

    ReplyDelete
  2. AlexMay 6, 2016 at 7:37 PM

    Built. This stacks so well with other pedals.

    I really jumped on this one. I connected a lot of the pots to each other directly, instead of through the board.

    ReplyDelete
  3. UnknownMay 19, 2016 at 12:43 PM

    Built. Gain pot seems to be reversed, didn't you noticed Alex ?
    I did it with a lot of pots to pots wiring too.

    ReplyDelete
    Replies
    1. Effects LayoutsMay 19, 2016 at 2:53 PM

      I did have the Gain pot reversed. It's fixed now and the layout has been updated.

      Delete
  4. Effects LayoutsJanuary 5, 2017 at 3:08 PM

    Thanks for finding that. It's fixed now.

    ReplyDelete
  5. nunonaosMay 3, 2017 at 5:24 AM

    Hello.do you solder the pots on the component side or on the back side (solder side)?. Thanks

    ReplyDelete
    Replies
    1. nunonaosMay 3, 2017 at 5:38 AM

      I'm referring do the perfolboard layout

      Delete
    2. Effects LayoutsMay 3, 2017 at 9:28 AM

      Solder side. You can do the component side if you're using long leg pcb mount pots.

      Delete
    3. nunonaosMay 3, 2017 at 9:36 AM

      Maybe this is a dumb question, but if you insert the pots through the component side and solder them on the solder side, wont they be in the wrong position (relative to the layout)?

      The other boards i've put together that had board mounted, i allways have the solder side facing up (when the pedal is opened), so that i can solder the pots, after position everithing inside the enclosure.

      What am I missing?

      Thanks a lot for all the layouts!

      Delete
    4. Effects LayoutsMay 3, 2017 at 9:40 AM

      Sorry, I wasn't clear. They're designed to be populated from the solder side if you're using regular right angle PCB mount pots, but if you populated them for the component side you'll need to rotate the pots 180º. Here's how I do them:

      https://www.instagram.com/p/BMju9RcBfga/

      Delete
    5. nunonaosMay 3, 2017 at 10:44 AM

      Ok thanks
      So first you solder them to the board and only after you mount the board+pots in the enclosure?
      Doesn't that cause any problems like if you miss drilling in the enclosure and then the pots won't fit in the enclosure correctly..?

      Delete
    6. Effects LayoutsMay 3, 2017 at 11:25 AM

      I get the board all populated, then solder in the pots last. There's drilling templates for pretty much every layout with board mounted pots that's on the blog to help elimate guess work instilling enclosures. There's a tab above that links you to the template folder.

      Delete
    7. nunonaosMay 3, 2017 at 11:29 AM

      Yeah. I've already checked the drilling template.
      But I usually mount the pots on the enclosure, then after i mount the board to the pots (all inside the enclosure) and only then I solder the pots to the board. This way if you need to adjust something it is still possible.
      But that's me, I'm a noob lol

      So, thanks one more time, you've enlightened me, you're a great guy and doing great work.

      Delete
    8. Effects LayoutsMay 3, 2017 at 2:24 PM

      That way won't work the way the layout is designed. You'd have no way of getting to the copper side to solder the pots in. If you want to mount the pots first like you described you'd have to do like I described above and use long leg pots and rotate them 180º. This ruins the drill template tho.

      Delete
    9. nunonaosMay 3, 2017 at 3:07 PM

      Yes, i've realized that. But thank you for your replies.
      I'll do it your way :)

      Delete
    10. nunonaosMay 6, 2017 at 9:06 PM

      The clipping LEDs go in opposite directions? Or do you insert them in the same direction?
      Thanks

      Delete
    11. Effects LayoutsMay 8, 2017 at 9:33 AM

      Opposite direction.

      Delete
    12. nunonaosMay 8, 2017 at 9:41 AM

      ok, thanks

      Delete
  6. UnknownMay 10, 2017 at 1:37 PM

    Just completed this build, after some missed connections on my part lol.. it sounds great, thanks a lot.. I had to replace the 5817 with a similar diode because they were sold out, but there's no issue with that at all..

    ReplyDelete
  7. nunonaosMay 12, 2017 at 9:14 AM

    Hello, does anyone have the "normal" voltages for the 4558?
    Shouldn't pin 4 be 0v?

    Thanks

    ReplyDelete
    Replies
    1. nunonaosMay 12, 2017 at 9:21 AM

      pin 5, sorry

      Delete
    2. Effects LayoutsMay 12, 2017 at 9:29 AM

      Pin 4 should be 0v, but highly doubt pin 5 should be 0v...

      Delete
    3. nunonaosMay 12, 2017 at 9:34 AM

      ok, i'm not getting 0v at any of them but i'm still waiting for the pots to arrive. i'll check if i made any bridge,,

      thanks

      Delete
    4. nunonaosMay 17, 2017 at 6:22 PM

      Finally received all the parts and it works great :)
      For me, the filter and blend knobs should be reversed but it's ok, it works and that's what's important :)

      Delete
  8. ZZOYDNovember 11, 2018 at 5:29 AM

    verified! I took blend pot b500k instead b100k.

    ReplyDelete