Pages

▼

Monday, May 16, 2016

Crazy Tube Circuits Ziggy Overdrive

Here's a cool MOSFET-based overdrive from Crazy Tube Circuits. Apparently it's based on a Neve console input channel stacked 3 times. With the gain down it sounds a bit like an AC30, and with it cranked it sounds like a Plexi. It was traced over on FSB (link here) and I've laid it out for board mounted pots. If you're interested in a fabricated board, check out the Starman in the store.



at

12 comments:

  1. ChrisMay 18, 2016 at 3:28 AM

    the cap of 2,3 lug of tone pot is 15nf not 22nf
    http://guitar-fx-layouts.42897.x6.nabble.com/CrazyTubeCircuits-Ziggy-OD-tp30130p30194.html

    ReplyDelete
    Replies
    1. Effects LayoutsMay 18, 2016 at 9:10 AM

      According to the schematic on the same page and over on FSB it's 22nF. And really, 7 nanofarads isn't all that much difference and will probably sound pretty much the same either way. So just adjust that cap to personal taste.

      Delete
  2. UnknownJune 28, 2016 at 10:43 AM

    Verified. Works great! Sounds amazing.

    ReplyDelete
    Replies
    1. Effects LayoutsJune 28, 2016 at 10:53 AM

      You beat me to it! I etched a board, but haven't had time to build it up yet. Thanks for verifying!

      Delete
  3. UnknownJune 28, 2016 at 4:08 PM

    I Just thought the gain little active unlike most pedals.

    ReplyDelete
  4. RobotmeisterSeptember 14, 2016 at 5:34 PM

    Thanks to your pcb an effortless build and most definitely a great sounding overdrive.

    ReplyDelete
  5. RobotmeisterSeptember 23, 2016 at 5:11 AM

    BTW. The switch is not included in the drilling template. I noticed only just before drilling :)

    ReplyDelete
  6. UnknownOctober 30, 2016 at 9:02 PM

    i can't get it works, i don't know if i have troubles with the switch, exist any way to take it away??

    ReplyDelete
  7. looperJune 13, 2017 at 3:32 PM

    i want to build this

    ReplyDelete
  8. UnknownMarch 7, 2018 at 10:22 AM

    hello, I have mounted everything according to the drawings only I have not found resistances of 240 homs instead I tried to install 220 homs and 270 homs but it does not work with any of them, it could be due to that it has to be just the resistance of 240 homs, the led lights and sounds only when it is in bypass. Thank you.

    ReplyDelete
  9. UnknownNovember 26, 2021 at 8:35 AM

    hola he terminado de montar el pedal según el plano y funciona todo menos el control de ganancia no se si alguien sabe como solucionarlo o cual podría ser el problema

    ReplyDelete