Pages

▼

Wednesday, June 17, 2015

Mad Professor Sweet Honey Overdrive

This is a great sounding drive pedal from Mad Professor. Very dynamic and tube-like, the Sweet Honey is a medium gain overdrive that can produce a wide range of tones, from jazz to heavy rock. I've laid the board out for right angle PCB pots mounted from the solder-side of the board, and it should all fit nicely in a 1590B.


at

13 comments:

  1. BerkicauMarch 14, 2016 at 11:13 PM

    22nF elco?

    ReplyDelete
  2. BerkicauJuly 1, 2016 at 4:15 AM

    I can't hardly hear the difference when I turn the Focus pot around
    anyway, I guess you can mark this one verified dude

    ReplyDelete
  3. UnknownDecember 23, 2016 at 8:38 PM

    it's verified ?

    ReplyDelete
  4. ExtMay 17, 2017 at 12:18 PM

    It works. Delivered lm833 instead of op275

    ReplyDelete
  5. Ones_and_ZerosNovember 28, 2017 at 11:23 AM

    Built this over the weekend. Great sounding OD. Thanks for the layout!

    ReplyDelete
  6. UnknownFebruary 10, 2018 at 11:18 PM

    Hi! Thanks for the layout! Are those weird values really important? Even 2k is impossible to find where I live! Tell me if it would make a big difference if i sub 2k2/2k, 3k3/3k, 2k7/2.61, and 15k(maybe 12k?)/13.7k.

    ReplyDelete
    Replies
    1. Effects LayoutsFebruary 11, 2018 at 10:42 PM

      If it were me building it, I would use those same substitutions. Shouldn't change the sound all that much.

      Delete
  7. Desde la cima del rockMarch 10, 2018 at 1:40 PM

    I did it. Amazing sound. Thanks for the layout

    ReplyDelete
  8. Charvel502March 12, 2018 at 7:35 PM

    I don't quite understand how you fit this in a box with the pots laid out the way they are. They all would end up in a line with the volume in the middle using board mounted pots No? It sounds fantastic but having a hard time wrapping my head around the pot layout....unless they're mounted on the components side...? Any help?

    ReplyDelete
  9. SegoyDecember 14, 2018 at 4:01 PM

    This comment has been removed by the author.

    ReplyDelete
  10. theeggmanApril 3, 2020 at 3:16 PM

    The drilling template is missing...
    As Charvel502 mentioned above, it's not possible to mount the pots on the board on the solder side, they're too close (regular 16mm pots).
    Not a big deal, i surely will wire the Volume pot.

    ReplyDelete