Pages

▼

Wednesday, November 12, 2014

The Aggressor by MOD Kits

MOD Kits has several cool effects kits that are point-to-point using tag strips. The only downside to those is they can take up a lot of space in an enclosure. Here's one of their newest circuits, The Aggressor. It's a high gain distortion effect. Here's a sound demo from their site.



at

9 comments:

  1. RobotmeisterOctober 3, 2016 at 2:57 AM

    Not as high gain as I expected, but working great.
    One little note: I did notice an error on the PCB. The holes for the 100nf cap underneath the 4001 diode are missing.

    ReplyDelete
    Replies
    1. Effects LayoutsOctober 3, 2016 at 7:49 AM

      Oh thanks for catching that. Layout's been updated with those pads.

      Delete
  2. PiergiorgioJuly 30, 2017 at 6:28 AM

    Where Tone 2 has to be connected? To volume 3?

    ReplyDelete
    Replies
    1. Effects LayoutsJuly 30, 2017 at 9:59 PM

      Correct. Here's the schematic for reference:

      https://www.modkitsdiy.com/sites/modkitsdiy.com/files/product_files/the_aggressor_schematic.pdf

      Delete
  3. Carpe DiemJuly 6, 2020 at 5:49 AM

    What is this mid-shift 1-6 please? What to put there?

    ReplyDelete
    Replies
    1. Effects LayoutsJuly 7, 2020 at 9:43 AM

      It's the DPDT switch that's in the top right of the image

      Delete
  4. Carpe DiemJuly 6, 2020 at 6:29 AM

    And where to connect volume 2 and 3,to ground both?

    ReplyDelete
    Replies
    1. Effects LayoutsJuly 7, 2020 at 9:44 AM

      Volume 2 is the output, Volume 3 connects to Tone 2.

      Delete
  5. mamah chyntiaApril 30, 2023 at 12:46 AM

    Apakah ini sudah verified
    ?

    ReplyDelete