Sneaky Fuzz Friday you probably didn't see coming! And on Valentine's Day too boot. See? I still love you guys. Here's Bjorn's Pink Purple Fuzz, a hybrid JFET, silicon, and germanium transistor fuzz. Schematic and discussion on FSB here. And don't forget about the sale going on over on the store. "Val20" at checkout gets you 20% off your whole order!
Note: I'm a bit rusty. I laid the whole circuit out before realizing the Nature pot wasn't centered, and still isn't on the perf side. So if you're building on perf, and board mounting that pot, you'll just need to angle it a little to fit to the drill template.
I built one last night. Very little volume. Couldn't see why. I built another one tonight. Same thing. Very little, almost no volume. I'm using 2n5952,mpsa18 and nte103a. I seems to lose the volume just before it hits the volume pot. It's plenty loud coming off of the tranny's, and the 470pf cap. Any suggestions for me to try? Thanks in advance!!!
Thank you!
ReplyDeleteYeah! you are alive! Welcome back!
ReplyDeleteGood to hear from you again. I would like to thank you for sharing your time and talents.
ReplyDeleteCome back we need you !!!!Thank you!!!!!
ReplyDeleteYay thanks and happy 2020
ReplyDeleteThank you, I missed you already.
ReplyDeleteI'll try this one!
Glad you came back! Great,David! Thanks!
ReplyDeleteIt works. Used J201 as Q1, MPSA18 as Q2 and AC128 as Q3. A little bit less gainy as the demos but works like a charm.
ReplyDeleteDid you tune drain resistor 14k7?
DeleteMy work too, Q1 2n4547, drain resistor changed, Q2-bc550 hfe 450, Q3 - mp38a hfe 58, Gane - enough,like distortion. I think this is not fuzz...
ReplyDeletemay be on the min gain its a fuzz
Deletewhere are the pcb of transfer?
ReplyDeletehttps://www.dropbox.com/sh/iaegm30zvqgcvp1/AACcrhVhRHBIB3k5b9qUEyJfa/BearFoot%20Fx?dl=0&preview=BearFoot+FX+Pink+Purple+Fuzz.pdf&subfolder_nav_tracking=1
DeleteThanks for the work man!!!! Question: The electrolytic caps on the left side of board are marked 470nf. Should they be 470uf?
ReplyDeleteThey are 470nF. Bjorn used electros in the original so I replicated that here.
DeleteI built one last night. Very little volume. Couldn't see why. I built another one tonight. Same thing. Very little, almost no volume. I'm using 2n5952,mpsa18 and nte103a. I seems to lose the volume just before it hits the volume pot. It's plenty loud coming off of the tranny's, and the 470pf cap. Any suggestions for me to try? Thanks in advance!!!
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteHas anyone else built one and had very little volume output?
ReplyDeleteIs it loud coming off of the among 22uF cap, diodes, and 10k resistor?
Delete
ReplyDeleteNice pedal, thanks! first pedal build since a long time ago.